CAR AUTO PARTS
- Automobile Fuel Injectors Parts
-
Automobile Fuel Injectors
- Toyota Automobile Fuel Injectors
- Ford auomobiles Fuel injectors
- Nissan Automobile Fuel Injectors
- Audi automobile fuel injectors
- Chrysler Automobile Fuel Injectors
- Mazda automobiles Fuel injectors
- Honda Automobile Fuel Injectors
- VW Automobile Fuel Injectors
- Chevrolet Automobile Fuel Injectors
- Other Brands Automobile Fuel Injectors
- Buick automobiles Fuel injectors
- Suzuki Automobile Fuel Injectors
- Mitsubishi Automobile Fuel Injectors
- Kia automobiles fuel injectors
- Peugeot Automobile Fuel Injectors
- Renault automobiles Fuel injectors
- Dacia sports car Fuel injectors
- Dodge Automobile Fuel Injectors
- GMC automobiles Fuel injector
- Hyundai Automobile Fuel Injectors
- Yamaha automobiles Fuel injectors
- Motorcycle Fuel injectors
- Oxygen Sensor
- Ignition Coil
- High Performance Fuel Injectors
- Crankshaft Position Sensor
- Throttle Position Sensor
- Ignition Module
- ABS Sensor
- Tire pressure sensor
- Fuel Injector Accessories
- Sensor Accessories
- Oil Control Valve
- Urea injector
- Other auto parts
How often is the carbon deposit removed
by:DEFUS
2020-05-24
It will be different according to different models. Generally speaking, the 4s shop will recommend the car owner to maintain it every 10,000 kilometers. The car owner can extend it to 30,000 to 40,000 kilometers according to his own driving situation. Owners can clean up between 20,000 and 20,000 kilometers.
Generally, the engine deposits are cleaned once every 20,000 kilometers. The following methods can reduce the formation of car carbon:
1. Use high-quality fuel. Because the main component of carbon deposits is formed by the wax and gum deposits in the fuel, the lower the gum content in the fuel, the better;
2. However, we cannot change the quality of the fuel, but we can choose to try not to add cheap fuels of unknown origin;
3. Avoid driving at low speed for a long period of time. If necessary, you can pull the high speed regularly. The principle of pulling high speed to eliminate carbon deposits is to accelerate the gas flow rate, which can take away a small part of the carbon deposits that are not yet firmly attached; increase the combustion temperature So that part of the carbon deposits in the cylinder are burned.
Custom message